Close

Recent Projects

A freeform brass wire sculpture featuring a round capacitive touch screen, 6-axis IMU auto-rotation, and reactive led filaments.
Project Owner Contributor

YUMO SMART CUBE: Touch screen/ESP32-S3 Brass Wire

yumobuildsYUMO.BUILDS

An ESP32-powered desk gadget with six round displays, with one touch its start spinning.
Project Owner Contributor

YUMO Roulette — A "Floating" Spinning Desk Gadget

yumobuildsYUMO.BUILDS

7-segment displays A hand-bent brass wire sculpture, clock powered by ESP32-C3 with NTP time sync.
Project Owner Contributor

YUMO GLOBE - Digital Clock

yumobuildsYUMO.BUILDS

Tiny ESP32-C3 desk gadget with OLED, live weather sensing, proximity glow & a phone-controlled web interface.
Project Owner Contributor

YUMO PULSE — ESP32-C3 Desk Gadget

yumobuildsYUMO.BUILDS

The Hardened Open-Source RTU for Professional Environmental Logging & AgrotechEcoLogger ESP32 is a scientific-grade, open-source development
Project Owner Contributor

Eco logger ESP32

gianluca14567Gianluca14567

Grating-based VIS-NIR Spectrometer: Customizable for spectral range, resolution, SNR, and detector options aided by a software design tool
Project Owner Contributor

JASPER: VIS-NIR SPECTROMETER

tony-francisTony Francis

Multi-stage overvoltage protection and supervision, AT and ATX mode. Set it up any way you want and power PCs from 80s to early 00s.
Project Owner Contributor

AT(X)Anything: a modular DC-DC PSU for retro PCs

w-adalbert-jastrzebskiW. "adalbert" Jastrzebski

A from-scratch C89 compiler that generates x86-64 Linux executables directly, complete with a text-mode IDE and source-level debugger.
Project Owner Contributor

Flash C

dilshan-jayakodyDilshan Jayakody

Development board and conference badge based on the 1976 Intel 8048 microcontroller
Project Owner Contributor

Intel MCS-48 Badge

mwfeurtadomwfeurtado

8-bit CPU/GPU, 640x480 VGA, made of ATF22V10 PLDs and a handful of 74-series chips, all DIP through-hole.
Project Owner Contributor

PLACARD: homebrew computer built from 22V10 PLDs

justin-davisJustin Davis

DIY hot air station built for under $100, with a Teensy 3.2, ATTEN handle, touchscreen, heat and airflow controls, and cooling.
Project Owner Contributor

DIY Hot Air Rework Station for Under $100

emilioEmilio

...or 1990: "GeoWorks Ensemble" (PC/GEOS) on 3Com Audrey
Project Owner Contributor

Coding like it's October 17, 2000

darekdumondarekdumon

Hand-built miniature 'almost' replica of the IBM PC 5150. No AI, CAD, or 3D printing was used or harmed during this production.
Project Owner Contributor

IBM PC 5150 Almost-Replica

rajaRaja

A haptic-feedback module that briefly runs a vibration motor when its enable input detects a falling edge.
Project Owner Contributor

Haptic Feedback Module for UI Buttons

michael-yimMichael Yim

A castellated MicroSD breakout exposing both SPI and SDIO signal connections.
Project Owner Contributor

MicroSD Card SPI / SDIO Castellated Breakout Board

michael-yimMichael Yim

A miniature stepper-driven linear actuator family with a threaded metal slider and DRV8833 driver.
Project Owner Contributor

Mini Stepper Linear Actuator: Original and Ver B

michael-yimMichael Yim

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2026 Hackaday