0%

0%

Neal D Corbett

Tinkerer

Leeds, UK

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 03/17/2014.

My Projects

The 2018 Hackaday Prize

Replacement laptop battery with cheap Lithium cells, 3D-printed case, and re-used electronics

3D Printed Laptop Battery

neal-d-corbett Neal D Corbett

A replacement tilt-stand leg for my cheap Logitech keyboard, designed and printed when the original broke

Replacement leg for keyboard

neal-d-corbett Neal D Corbett

Web-controlled telepresence via a Raspberry Pi stuck to a cheap infrared-controlled toy robot

Robobug Telepresence Bot

neal-d-corbett Neal D Corbett

The 2018 Hackaday Prize

A set of stick-on LED lights non-destructively converted to all run off a single rechargeable USB power-bank

Under-counter lights converted to USB power

neal-d-corbett Neal D Corbett

Projects I Like & Follow

The 2018 Hackaday Prize

A very basic "action camera" gets a more capable battery

SQ11 - Massive battery upgrade

This old drill is still handy for light use around the house, but the NiCd battery pack is long dead. Why not use 4x AA NiMH cells in it?

Replacement Battery for Ryobi 7.2v Drill

A 3D printed dog prosthetic, built using Fusion360 and printed using my school's Prusa MK2s. (Repairs You Can Print Contest - Student Entry)

Puppy Prosthetic

benbrochtrup ben.brochtrup

Hold your broken Hololens headband together if you were unfortunate enough to break it.

Hololens Headband Repair Kit

This project will attempt to record the production 3D printed molds, in this case for a glider landing-strut boot

Printing Molds for Rubber Repairs

classicrockfanatic88

Designed and printed a replacement guard bracket for my whipper snipper/weed wacker/ line trimmer

Weed-Wacker Bracket 2.0

Replacing the whole detergent and rinse aid dispenser unit because of this small plastic item seemed like a huge overkill...

Replacing a Disintegrated Rinse Aid Dispenser Lid

The friction wheel on a bicycle dynamo wears down over time. Instead of buying a new dynamo, a 3D printable wheel is designed and printed.

Bicycle Dynamo Wheel Repair

The 2018 Hackaday Prize

A short summary of the process I used to print a spare part

3D printed spare for spice grinder

liamthompson Liam_Thompson

The 2018 Hackaday Prize

In this disposable world, why replace when you can repair. Car speakers were my target this time!

Replacement Faceplate for Pyle PLMR24 Speakers

derek-tombrello Derek Tombrello

Make a replacement bin for a discarded pencil sharpener

Save a Pencil Sharpener from the Landfill

nathan-brown Nathan Brown

The 2018 Hackaday Prize

A 3D printed Dell Pointstick replacement for essentially $0 instead of like, $12 for 3 on eBay

Replacement Dell Pointstick Nubby Thing

dan-finkelstein Dan Finkelstein

The 2018 Hackaday Prize

Lost the plug to keep your mattress inflated? Sleep well after printing this one!

3D Printed air-mattress plug.

adwiebe adwiebe

Have a microwave turntable that refuses to turn?

Microwave Fix

keith-violette Keith Violette

I got this old laptop with a broken display hinge. Everything else worked, so I fired up FreeCAD to build a replacement...

Repairing a broken display hinge on an Asus Pro31J

The 2018 Hackaday Prize

The door latch mechanism broke. Drew and printed a replacement, still going strong 4 years later

Microwave 3D print repair

3D printed foot repair

Chicken tin toy prosthesis

Part of things you can print.

Flusher handle

jeremy-g Jeremy g.

View all

Bits