0%

0%

sender

DIY electronocs and climate sensors deweloper

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 05/29/2022.

My Projects

Radiation sensor for the youngest engineers

My first DIY dosimeter

Projects I Like & Follow

Follow for the 'Hacklet' and latest news about hackaday.io

Hackaday.io Project

Hackaday Prize 2019

This wind-up car gift card is fully 3D-printable and is the ideal present for your friends and family.

Fully 3D-printable wind-up car gift card

brian-brocken Brian Brocken

The 2015 Hackaday Prize

Arduino connects to the TX line (of a router, RPI) and display serial data on smartphone over WiFi

Hardware serial port monitor with WiFi

Official Hackaday Prize Entry

a hardware version of your crackme and reverseme games for learning hardware reverse engineering techniques without expensive tools

Hardware Reverse Engineering Learning Platform

tom-van-den-bon Tom Van den Bon

The 2015 Hackaday Prize

Make cooler robots, faster and with less effort.

BowlerStudio: A robotics development platform

kevin-harrington Kevin Harrington

The 2018 Hackaday Prize

printed - using only PETg, no flex filament needed integrated NEMA17 stepper motor only three small parts for tolerance compensation

3D Printed Strain Wave Gear

johannes-hassler Johannes Hassler

An open source HW & SW motor controller for fine-grained control of brushless DC motors for robotics.

SmoothControl

matthew-moore Matthew Moore

The 2016 Hackaday Prize

Visually impaired students can make great use of 3D prints to learn just about any subject, but their teachers need help making good models.

3D Prints for Teachers of the Visually Impaired

joan-horvath Joan Horvath

Small UPS with fix 3V3/1A output and adjustable 1.3 to 12V output, Li-Ion charger and protection

IoT UPS

christoph-tack Christoph Tack

The 2017 Hackaday Prize

An e-NABLE robotics project to give hands to those without use of their hands. Designed with your help.

Ivan the Teambuilt Robot

les-hall Les Hall

The 2018 Hackaday Prize

Self-Powered IoT Node for Environmental Sensing

SPINES Mote

The 2015 Hackaday Prize

An Internet of Things Device to Let My Aging, Disabled Father Know that the Stove is Off, and Ease His Paranoia...

An IOT Device That Tells Dad the Stove is Off.

casual-cyborg Casual Cyborg

A simple pocket-sized projector utilizing an Arduino

DIY Pocket Projector Design

sir-michael-ii Sir Michael II

scalable hardware for neural network system

NSCE-ngbrain

In the Lora IoT project tutorial, I have shown how to make the LoRa Arduino ESP8266 control relay from the Blynk IoT platform with feedback.

LoRa IoT Project With Arduino ESP8266 Blynk

In this project we show you how to turn a cheap RC car into a programmable robotic vehicle that you can use in all sorts of projects.

Simple programmable robotic vehicle - $20 or less

A small(er) Vortex Particle separator that can be easily 3D printed. Use with a 2" or 1.25" (adapters needed - can be printed) vacuum hose.

3D Printed Vortex Particle Separator for Shop Vac

aaron-p Aaron P.

This robot is designed for supporting human in some specific condition, by take advantages of its special rotating forward mode.

Brain controlled multifunctional rolling robot

haohong-wang Haohong Wang

View all

Bits