0%

0%

Supreet Yadav

Electronics hobbyist.

Sweden

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 07/12/2021.

My Projects

4 bit adder made using AND, OR, XOR gates which were made with Photoresistors and LEDs.

Adding numbers using photoresistors and led

Projects I Like & Follow

Getting Marlin to run on the Monoprice Mini/Malyan M200.

Monoprice Mini Marlin 2.0 Support

jc-nelson J.C. Nelson

A compact modular design of the strain wave gear for general robotic applications.

Compact Strain Wave Gear Actuator(s)

Use a Kodak projector and DSLR camera to automate digitizing slide photography

Kodak Slide Projector Scanner

bryan-howard Bryan Howard

Hackaday Prize 2020

Mission "Wifi" Impossible > Bring Long Range 5G and 2.4 G WiFi Backed By A 1 Gigabit Fiber To The East Brainerd EF-3 Tornado Disaster area.

Open Sky Anchor WiFi Drone Brings The GIG

josh-starnes Josh Starnes

The 2018 Hackaday Prize

Chapter 1 : Raspberry Pi Zero W Stepper Motor Module Balancing Robot and 3d Printer - CNC Machine

Raspberry PI Module for Robotics Mythololgy (1)

reginald-sourn Reginald Sourn

2021 Hackaday Prize

A DIY digital stereo-microscope. Low cost. Open source software and hardware. For electronics inspection, soldering work and more.

Stereo Ninja

fablab-mnchen FabLab München

Hackaday Prize 2019

This projects converts a Bobby-Car (children's ride-on toy) to electric by using 4 Hoverboard motors, VESC controllers and an ESP32

Electric Bobby-Car

peter-ptzi Peter Pötzi

Emulate a small size ROM with a RAM and Arduino with Intel-HEX interface

ROM-emulator

fjkraan fjkraan

Turn your N64 controller into a bluetooth gamepad

N64 bluetooth gamepad

shyri-villar Shyri Villar

Here I build a external GNSS module for mobile devices without or unsatisfactory navigation GNSS option.

GNSS bluetooth module with u-blox NEO8N

12 Degrees of Freedom, runs on Windows/Mac/Linux/Android/iOS, 1Kg+ Payload

TiBeast - Quadrupedal Robotic Dog

celestial-robotics Celestial Robotics

A smart display that can be embed into a wall socket that controls all the IOT device in home.

Smart Home Display IOT

ANANTHAKRISHNAN U S

USB-PD sink with headers compatible with breadboard. Features a fixed 3.3V supply and one-click voltage selection without incorporating MCUs

Low-cost USB-PD Sink for Breadboard (and More)

Detect your LAN from browser

LAN Detector

dev-lab dev-lab

This project uses a 3D Printed Speaker "Cone" and Coil Bobbin as an audio exciter

3D Printed Audio Exciter

If you want a NodeMCU device that could help you to control all your house electrical devices, then this will be your best guide

NodeMCU Home Automation (ESP8266)

diy-guy-chris DIY GUY Chris

newest edition of its Power over Ethernet (PoE) HAT. The Raspberry Pi PoE+ HAT outperforms its predecessor by adopting the 802.11at PoE+...

The Raspberry Pi PoE+ HAT Has Been Announced.

Make IoT-based Smart Home Automation Using Blynk & ESP32 to control an 8-channel relay module from the IR Remote, manual switch & Wi-Fi.

Home Automation using Blynk IR Remote & ESP32

View all

Bits