0%

0%

Peter Balch

50 years developing s/w and h/w

Scotland

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 07/17/2022.

My Projects

Supplyframe DesignLab: 2022 Hackada…

An antique intercom that we use every day for our apartment block.

Vintage Intercom Re-purposing

You can use Solve as an ordinary pocket calculator or type in several equations in any order and it will solve them or plot the results.

Equation Solving Calculator

Supplyframe DesignLab: 2022 Hackada…

Converting an internal telephone for use as a DTMF landline phone.

Old Telephones

Supplyframe DesignLab: 2022 Hackada…

An autowinder keeps a weight-driven clock going forever.

Autowinder for Pendulum clock

Projects I Like & Follow

Official Hackaday Prize Entry

Integration of cheap wireless Arduino sensor nodes with an awesome home automation platform called OpenHAB. Explore interface options.

$20 Wireless Arduino Home Automation w/ OpenHAB

eric-tsai Eric Tsai

How to power up and communicate with the cheap RCWL-0516 radar sensor module

First steps with the RCWL 0516 radar switch

Hackaday Prize 2019

Demonstration robot for learning principles of real-time control using Raspberry Pi, RT Linux, and ROS.

Bobble-Bot

mike-moore Mike Moore

The 2018 Hackaday Prize

Fully functional floor piano, with midi in/out, leds and training mode.

Cheap Expandable Floor Piano

The 2018 Hackaday Prize

diy direct-drive extruder 3D printer running Klipper firmware

protoDEV 3d printer

michal-wojciechowski Michal Wojciechowski

Is there room for another oscilloscope? Real Time nodejs/html5 Sci ToolBox! Arduino | Raspberry Pi | FPGA

GinScope | Science ToolBox | Oscilloscope

gintaras-valatka Gintaras Valatka

Track and Trace anything with the Arduino AnyTracer of only 25 x 25 mm! It is the smallest, complete GPS GSM tracker in the entire world.

Arduino AnyTracer

addydej addydej

Hackaday Prize 2019

The Arduino Nano Quick Project. Develop Everywhere.

Arduino Nano QP

alain-mauer Alain Mauer

Developing my first hardware con talk in the open

Supercon talk: a pragmatic guide to motor controls

jonathan-beri Jonathan Beri

Hackaday Prize 2020

This is a lower limb exoskeleton developed to aid patients with walking disabilities in their therapies and to perform simple tasks.

Open Exosuit for Differently Abled

alex-m-sunny Alex M Sunny

A slightly unsafe journey into alternative fuels.

Run a small engine on WATER! Ends with a BANG!

TheThriftstoreHacker

MQTT-enabled Numitron clock with Arduino and ESP8266

Numitron Clock

harri-ohra-aho Harri Ohra-aho

In a few steps we build a basic ultra low power WiFi home automation system by using Raspberry Pi, IOT Cricket module(s) and MQTT protocol

Ultra low power WiFi home automation system

Multi-Functional Custom Robotic Research Platform

PROJECT MOOBA

nebra-labs NEBRA Labs

You'll learn what is the finality of standalone Arduino and how it is applied in real projects.

Standalone Arduino Applied in Projects

silcios-lab Silícios Lab

In this project, I upgraded my 3D printer to be able to capture time-lapses of the prints without any additional electronics.

3D Print Time lapses Without Octoprint

Large Humanoid Robot 150cm With lightweight plastic design and originally planned for walking

Large Humanoid Robot

A small(er) Vortex Particle separator that can be easily 3D printed. Use with a 2" or 1.25" (adapters needed - can be printed) vacuum hose.

3D Printed Vortex Particle Separator for Shop Vac

aaron-p Aaron P.

View all

Bits