0%

0%

Kevin

Playing around with a lot of stuff. Master of none.

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 02/22/2021.

My Projects

Simple and effective busy board for toddlers interested in playing with electronics

Kids Electronics Busy Board

Learning how to multiplex and utilize port expanders for an RGB Matrix, easily program using Excel.

LED RGB Matrix with MCP23017, Pro Micro, and Excel

Use color sensor and Arduino to change RGB LED for a childs nightlight. Teach cause and effect with colors!

Color Sensing Lithopane Nightlight

Projects I Like & Follow

Hackaday Prize 2019

This wind-up car gift card is fully 3D-printable and is the ideal present for your friends and family.

Fully 3D-printable wind-up car gift card

brian-brocken Brian Brocken

The 2017 Hackaday Prize

This project describes the use of Raspberry Pi as an IoT connected vital signs monitor. The HealthyPi HAT for Raspberry Pi used.

Connected Health: Open source IoT patient monitor

ashwin-k-whitchurch Ashwin K Whitchurch

The 2018 Hackaday Prize

This open-source, low-power LTE shield uses cutting-edge CAT-M technology and also integrates GNSS location capabilities!

LTE CAT-M1/NB-IoT Shield for Arduino

timothy-woo Timothy Woo

An Arduino-programmable guitar effects pedal

ESP32 Guitar Shield

garygru GaryGru

Hackaday Prize 2019

Building a robot car with a smartphone at its heart.

DeepRC Robot Car

piotr-soklski Piotr Sokólski

Bootstrapping a dev environment with the Pico

Pi Pico, PicoProbe and VS Code

A high speed, highly sensitive piezoresistive sensor matrix that provides quantitative information related to prosthetic fit.

Piezoresistive sensor matrix

chriscoulston chris.coulston

A first attempt for a small, attractive and practical soldering station, a project designed not by the cost but rather the experimentation.

AVR Soldering Iron

A project for my grandchildren to first build line-following robots then convert them to being controlled by their phones and tablets.

IP control for inexpensive line following robots

Hackaday Prize 2020

Suspended Additive Layer Extrusion Manufacturing - 3D Printing extremely large multi-storey structures.

SALEM - Construction 3D Printing

jonknutton jon.knutton

Hackaday Prize 2020

An innovative, non-invasive, assistive Human Interface Device for ALS affected people based upon Electrooculography (EOG) technique.

EyesDrive - Steering with eyes movement

federico-runco Federico Runco

A clock with 5 hands to show Time and Date

CalendarClock

michael-mller Michael Möller

Development Board for the new ATmega4808 Series of AVR Microcontrollers

ATmega4808 Development Board

stefan-wagner Stefan Wagner

Bring real-time IoT to old mechanical energy meter

IoT for old Energy Meter

100% open hardware/software flow sensor.

Freeflow flow sensor

steve-glow Steve Glow

I a student from 9th Standard.I have created a project which can track the daily health status of Quarantined people having chance of COVID.

Ultimate COVID-19 Solution : CoronaSecure

arijit-das Arijit Das

Infinity mirror embedded in a cat ears headband.

InfiniKitty Ears

angela-sheehan Angela Sheehan

Our project is a garage door which operate using an arduino hardware and software

Garage Door 2020

Mateusz Grzebyk

View all

Bits