Close
0%
0%

max

Camera Assistant, tinkerer

Following
Send a private message
Similar accounts worth following
2 Followers
27 Following
1 Projects
2 Likes
max
Send a private message

This user joined on 04/29/2024.

516
2
0
2
RPi-based cyberdeck tablet with a 900mhz WiFi HaLow radio built in
Project Owner Contributor

Camera Control Tablet

maxmax

40.8k
3.9k
15
359
A low-cost, high-performance bipedal walking robot
Project Owner Contributor

Blackbird Bipedal Robot

gabrael-levineGabrael Levine

24k
5.8k
15
242
Demonstration robot for learning principles of real-time control using Raspberry Pi, RT Linux, and ROS.
Project Owner Contributor

Bobble-Bot

mike-mooreMike Moore

21.3k
6.4k
16
139
Takes 3D surface scans at close range. It is simple to construct as it uses off the shelf hardware and software.
Project Owner Contributor

3D scanner

jolarJolar

16k
3.3k
26
145
A compact modular design of the strain wave gear for general robotic applications.
Project Owner Contributor

Compact Strain Wave Gear Actuator(s)

leo-vuLeo Vu

14.3k
4.4k
6
92
A general purpose robot joint using a cycloidal gearbox and an ODrive modified to support active compliance
Project Owner Contributor

3D Printed Robot Joint with Active Compliance

tim-wilkinsonTim Wilkinson

11.6k
6.9k
9
30
Use a Kodak projector and DSLR camera to automate digitizing slide photography
Project Owner Contributor

Kodak Slide Projector Scanner

bryan-howardBryan Howard

5.3k
1.3k
1
26
DIY ESP32 camera board with OLED display, RGB LEDs, SD card & light sensor
Project Owner Contributor

ESP32 Camera board

miroslav-zuzelkaMiroslav Zuzelka

3.8k
3.1k
3
17
Resto-Mod Dungeons and Dragons Digital Dice Tower based on a 1975 Bell & Howell IMD-202 Digital Multimeter
Project Owner Contributor

1978 "Heathkit" D&D Digital Dice Tower

john-andersonJohn Anderson

3.6k
3.3k
2
24
Grasp is a robotic hand designed to to be assembled by a non experienced user and can be useful for different applications.
Project Owner Contributor

Grasp Bionic Hand

xavi-canoXavi Cano

2k
2.2k
4
9
A project to design, build and fly a 3D printed high power model rocket air-frame, capable of flying with up to a K Class motor.
Project Owner Contributor

Fully 3D Printed Level 1-2 NAR Cert Rocket

mitchell-oconnorMitchell O'Connor

1.8k
414
2
5
WIZnet W5500 + RaspberryPI5 PoE+
Project Owner Contributor

Raspberry Pi 5 + PoE

alanAlan

1.6k
1.7k
0
6
Easy and Fun: Track objects with a Raspberry Pi, a camera and an Arduino in less than an hour!
Project Owner Contributor

Raspberry+Arduino CamTracker

marcelo-valeriaMarcelo Valeria

1.6k
492
2
12
The famous ball balancing platform reimagined
Project Owner Contributor

BJR_01

tamas-feherTamas Feher

1.6k
2.1k
0
9
AI Based Object Tracking Robot Using Arduino and HuskyLens
Project Owner Contributor

Arduino AI Object Tracking Robot

jithin-sanalJithin Sanal

1k
1.1k
3
1
This post explains how to control a Nikon D3100 DSLR, and then get the images off of it.
Project Owner Contributor

Remote control and image retrieval from Nikon DSLR

sciencedude1990sciencedude1990

809
951
0
2
Very simple to implement, but very advanced intelligent access controller
Project Owner Contributor

Door lock controller with fingerprint sensor

ruslanRuslan

660
899
0
9
ISP and UPDI Combo Programmer for AVR Microcontrollers
Project Owner Contributor

CH552 picoAVR ISP+UPDI Programmer

stefan-wagnerStefan Wagner

261
371
0
1
Wiggly tentacle. Now with remote control!
Project Owner Contributor

Remote Control "Cable" actuated tentacle

brian-kwonBrian Kwon

View all

Share this profile

Share

Bits

Send a private message to max

Become cool instantly

Create your Hackaday.io profile like max and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2025 Hackaday

Report user as inappropriate

You are about to report the user "max", please tell us the reason.