Close

Recent Projects

This is a feature creep that wouldn't just go away. This project is a CLI tool for GreenPAKs using the offical GreenPAK Serial Debugger.
Project Owner Contributor

Open-source GreenPAK CLI tool + GSD driver

anders-helgessonAnders Helgesson

A full-featured Forth-based RTOS for ARM Cortex-M
Project Owner Contributor

zeptoforth

travis-bemannTravis Bemann

Pocket-sized 240W lab supply! Leverages USB-PD 3.1 EPR for adjustable 48V/5A output.
Project Owner Contributor

PD240W

theo-hengTheo Heng

An affordable AND useful FPGA board for all. Finally.
Project Owner Contributor

Crystal Board - FPGA Platform for All

chrisChris

Open-source, low-cost 10.5 GHz phased array radar with PLFM modulation; available in 3km and 20km range
Project Owner Contributor

Open Source PLFM RADAR. Up to 20Km Range

nawfalNawfal

Mini-PI Media Server for use on home network or as a wifi access point to stream media from
Project Owner Contributor

Mini-PI Media Server

diddydiddy

A vibe-coded interactive disassembler for the vintage Mitsubishi M50740-series microcontrollers
Project Owner Contributor

Vibe Codin' - M50740 Disassembler

ziggurat29ziggurat29

Eurocard guide system made by 3D-printer
Project Owner Contributor

Eurocard board guide system

fjkraanfjkraan

The EV7000-3 is a replica of a 1990s development environment for the Texas Instruments TMS7000 Family of microcontrollers
Project Owner Contributor

Texas Instruments EVM7000 replica

fjkraanfjkraan

I Needed a Simple MIDI Sample Player for My Band — So I Built One on ESP32
Project Owner Contributor

Samplotron — an Open-Source ESP32 Hardware Sampler

jakub-the-developerJakub The Developer

An 8th grader designing and building a real 8-bit CPU from scratch using custom architecture and discrete logic.
Project Owner Contributor

TTL 8-Bit CPU better than Z80

bohan-xuBohan Xu

this is a 6DOF robot arm made with steppers motors
Project Owner Contributor

Robot Arm ACURA

alexisAlexis

In-Situ Synthesis of Conductive Nanomaterials via Tool-Changing system on an FDM corexy 3D printer.
Project Owner Contributor

Hybrid MicroElectronics-Factory 3D Printer

joanbelkJoanbelk

a Robot dog build with fully custom BLDC actuators
Project Owner Contributor

Robot Dog

alexisAlexis

Fully functional scanner, inspired by Star Trek's Tricorder
Project Owner Contributor

Omni-corder

motleyMotley

I wanted to buzz around 2024 EMF camp in something different. So I designed and built an electrically powered, tracked tricycle.
Project Owner Contributor

Electric Tracked Tricycle for EMF camp

tony-goacherTony Goacher

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2026 Hackaday