Close

Recent Projects

Development board and conference badge based on the 1976 Intel 8048 microcontroller
Project Owner Contributor

Intel MCS-48 Badge

mwfeurtadomwfeurtado

What if Commodore had never gone bankrupt and Amiga development had never stopped?
Project Owner Contributor

Project Ceylon: What If the Amiga Never Died?

mikeMike

A 0.96-inch 144×72 color memory-LCD breakout with SPI; the exact panel model is unconfirmed.
Project Owner Contributor

JDI 0.96-inch 144x72 Color Memory LCD Breakout

michael-yimMichael Yim

The family room computer, reinvented: a Raspberry Pi kiosk where physical RFID cards launch retro or modern edutainment and software
Project Owner Contributor

ChipBit - an RFID Card Driven Family Home Computer

kevinKevin

A street-legal, flat-pack utility truck built on square tubing, 48V swappable power, and complete Right-to-Repair sovereignty.
Project Owner Contributor

Heartland EV

jeremyJeremy

A 40kg load-cell assembly with HX711 ADC breakout and an acrylic enclosure.
Project Owner Contributor

Weighing Scale 40kg Load Cell + HX711 ADC Breakout

michael-yimMichael Yim

A V-grooved protoboard that can be snapped into smaller sections on a four-hole grid.
Project Owner Contributor

Snappable V-Grooved Protoboard (36 x 32 Positions)

michael-yimMichael Yim

A 64GB USB 3.0 flash drive concealed inside a cable-shaped enclosure with a nonfunctional Mini-USB end.
Project Owner Contributor

StealthDrive: The Secret Hidden USB Drive (64GB)

michael-yimMichael Yim

A breadboard UI module combining an OLED, two rotary encoders, a switch, buzzer and RGB LED.
Project Owner Contributor

Mini IO Breadboard-Friendly User Interface Module

michael-yimMichael Yim

Where I apply lessons learned to make a monitor for a 1970s era personal computer.
Project Owner Contributor

A Better Small CRT Like Monitor For Retro Projects

michael-gardiMichael Gardi

welcome to the 20C, a modular 6502 computer with a very simple architecture designed from the ground up to learn and experiment.
Project Owner Contributor

The 20c

osolabsosolabs

A wall plotter built on an old drawing board: belts and counterweights in pipes, self-homing, SD-card standalone.
Project Owner Contributor

Sash: A Standalone A2 Polargraph Drawing Machine

robert-salmonRobert Salmon

7-segment displays A hand-bent brass wire sculpture, clock powered by ESP32-C3 with NTP time sync.
Project Owner Contributor

YUMO GLOBE - Digital Clock

yumobuildsYUMO.BUILDS

Tiny ESP32-C3 desk gadget with OLED, live weather sensing, proximity glow & a phone-controlled web interface.
Project Owner Contributor

YUMO PULSE — ESP32-C3 Desk Gadget

yumobuildsYUMO.BUILDS

An ESP32-powered desk gadget with six round displays, with one touch its start spinning.
Project Owner Contributor

YUMO Roulette — A "Floating" Spinning Desk Gadget

yumobuildsYUMO.BUILDS

Where we harness the power of AI and OpenSource to spin a new generation of LambdaSpeak 3 for the Amstrad CPC # RC2026/10 Entry! #
Project Owner Contributor

LambdaSpeak 4 aka LambdaSpeak AI

michael-wesselMichael Wessel

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2026 Hackaday