Close

Recent Projects

Network Lab
Project Owner Contributor

Home_LAB

rhea-raeRhea Rae

SCP-1471
Project Owner Contributor

MalO SAO

parallel-logicParallel Logic

I made myself a 3D printed Morse code paddle, but I needed a way to interface it with my computer for use with Morsechat.
Project Owner Contributor

DIY Morse Code Key Interface!

mctechdevMcTechDev

Another homebrew computer based on the MSX standard. But it uses a Z380 microprocessor.
Project Owner Contributor

XRX - eXperimental Research X

marcellus-pereiraMarcellus Pereira

A board series to help debug hardware at the lowest level
Project Owner Contributor

Alien Probes

jacques-pelletierJacques Pelletier

A beginner made a typing practice device.
Project Owner Contributor

Haptic Touch Typing Trainer Using Vibrating Keys

cupricecuprice

Based on Compute Module - 3D Printed open source design
Project Owner Contributor

Modufix - DIY Open source modular phone

shamblerbowlerShambler.bowler

Classic arcade with all the latest technological advancements, ready for the classics. Enjoy!
Project Owner Contributor

THE ULTIMATE MINI ARCADE

srrubioSrRubio

Loko is the 12 gram GPS tracker with extreme battery life.
Project Owner Contributor

Loko-Offline GPS tracker with 270 days battery

akio-satoAkio Sato

Mini-PI Media Server for use on home network or as a wifi access point to stream media from
Project Owner Contributor

Mini-PI Media Server

diddydiddy

This is part of my screw and bolt robotic sorter. This gripper can pick up bolts and screws from a plate.
Project Owner Contributor

robotic gripper for ultimaker uno

aadAad

6DOF tracking at extremely simple and cheap ! The computational load is light ! It can be used in places where light cannot be used !
Project Owner Contributor

Ultrasonic 3D Motion Capture (Orientator)

yohei-inadaYohei Inada

This project uses a duodecimal system an cross domain analasys. full transparency and SLD blueprints present.
Project Owner Contributor

vortex-anapole-confinement

madhattermadhatter

A compact step-by-step motion and I/O controller for pick-and-place, conveyors, feeders, training kits and small automation machines.
Project Owner Contributor

FMC – No-Code Motion + I/O Controller

danhcktddanhcktd

After a journey beginning with the commodore 1351, microsoft grey eye mouse, it's surprising just how bad modern mice feel.
Project Owner Contributor

The perfect mouse

lion-mclionheadlion mclionhead

Building a mechanical television with parts only from the 1920s. Focusing on simplicity.
Project Owner Contributor

Mechanical Television - only parts from 1920s

paul-kocylaPaul Kocyla

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2026 Hackaday