Close
0%
0%

forthnutter

Electronic Engineer

Australia
Following
Send a private message
Similar accounts worth following
9 Followers
30 Following
2 Projects
12 Likes
forthnutter
Send a private message

This user joined on 12/30/2014.

2.5k
15
0
11
Leap Electronics WICE-4M EPROM Emulator Reverse Engineered
Project Owner Contributor

WICE-4M

forthnutterforthnutter

55
1
0
1
Can we rebuild it from scratch
Project Owner Contributor

Applix 1616

forthnutterforthnutter

1.2k
9
0
7
OCRd and typeset as html where possible. A work in progress.
Project Owner Contributor

Applix 1616 Documentation

keithKeith

Forthnutter's List

List of things

Curated by forthnutter

7
3

Things I've Built

Channel 7 Sydney

Very Long sign Spanning 3 sides of the building, the 200mm character height display has a total length of 140 metres (70 in both red and white LED’s), which equates to approximately 383 characters per line.

Keno LED Sign

LED Sign to display keno numbers.

Upper House

LED Sign project, had animated arrow pointing up. Also animated arrow down for Lower House.

12.2k
73
18
95
A cyberdeck with a fluorescent display for max cyberpunk looks
Project Owner Contributor

KOAT0 Portable Terminal

robsoncoutoRobsonCouto

9.5k
80
4
64
A very compact, very inexpensive, very DIYable, very precise little CNC mill. This one uses 3d printed parts.
Project Owner Contributor

Minamil 3dp: another minimal CNC mill

paul-mcclayPaul McClay

5.6k
37
20
35
EPROM programmer too expensive? This isn't!
Project Owner Contributor

Relatively Universal ROM Programmer

anders-nielsenAnders Nielsen

5.1k
82
17
54
The device tests for continuity and internal resistors within various USB Cables and exposes some pins for multimeter testing.
Project Owner Contributor

USB Sleuth Cable Tester

spencer-maroukisSpencer Maroukis

2.9k
286
2
19
This is my project page for my new home brew computer, a multi-processor 63c09 and AVR SBC.
Project Owner Contributor

HB63C09M - 10x10 HD63C09 Based SBC

dave-collinsDave Collins

2.9k
53
12
51
My 'modern' take on the Tandy TRS-80 Model 100.
Project Owner Contributor

VCF-80 Model 100

evan-scheelEvan Scheel

2.7k
29
13
27
Simple and inexpensive way to make such an instrument, with which we can measure resistances with a resolution of 1 milliohm.
Project Owner Contributor

DIY Precise Arduino Miliohmmeter

mircemkmircemk

2.6k
19
4
18
A low-cost and accurate tool for analyzing the power consumption of ultra-low power and IoT devices with rapidly changing current usage
Project Owner Contributor

MetaShunt: High Dynamic Range Current Measurement

jake-wachlinJake Wachlin

2.4k
17
4
16
- a 6x09 based retro computer
Project Owner Contributor

µLind (micro-lind)

eric-lindEric Lind

2.3k
19
1
21
An interesting open source Arduino + 3D Print project uses gyroscopic sensors and accelerometers to detect the movement of the balanced obj.
Project Owner Contributor

Arduino 3D Printed self Balancing Cube

mircemkmircemk

2.3k
32
3
44
A set of wall mount, magnetic SMD storage container / cartridge for product development
Project Owner Contributor

SMD Organizer Cartridge (Magnetic Wall Mounted)

tobychuitobychui

1.5k
16
2
19
My take on a highly integrated, Motorola 68000 based "single" board computer.
Project Owner Contributor

COMET68k

tomTom

1.2k
13
2
16
"Etch A Sketch" style frame and function for the badge from Hackaday Supercon 2023
Project Owner Contributor

Hack A Sketch

jeremygeppertjeremy.geppert

1.1k
11
6
13
Cherry MX compatible upgrade for Mitsumi mylar keyboards in Texas Instruments TI-99/4A computers - using original keycaps.
Project Owner Contributor

KEYBOARD/4A-99

troy-schrapelTroy Schrapel

1k
7
0
6
The TEC-1 was released in 1983 by Talking Electronics but it had some limitations. I set about to fix them and update the project.
Project Owner Contributor

TEC-1G: 40 year Anniversary Z80 SBC

mark-jelicMark Jelic

980
15
0
18
An iconic machine boosted to the highest level (Hires, 512KB user RAM, video shadow RAM, zx81 mode...)
Project Owner Contributor

Mercury Ace (not only another Jupiter Ace clone)

wilco2009wilco2009

422
6
1
7
Easy measure current consumption in sensors
Project Owner Contributor

uCurrent meter

alex-fatiukAlex Fatiuk

153
4
0
3
VSCP (Very Simple Control Protocol) is an open-source framework for decentralized communication and control in diverse IoT applications.
Project Owner Contributor

The Very Simple Control Protocol (VSCP)

ke-hedmanÅke Hedman

View all

Share this profile

Share

Bits

Michael Gardi wrote 02/16/2022 at 08:44 • point

Thank you for your interest in my WDC-1 a "Working Digital Computer" project. 

  Are you sure? yes | no

Samuel A. Falvo II wrote 12/20/2021 at 05:50 • point

Thank you for liking the Kestrel Computer Project.

  Are you sure? yes | no

Igor wrote 10/07/2021 at 11:22 • point

Thank you for liking my #CRISS CP/M 8-bit Homebrew DIY Computer (AVR based) ! Computer is getting closer to standards: in new fw versions it supports VT100/ANSI terminal and learned sleep mode :)

  Are you sure? yes | no

Michael Gardi wrote 09/16/2021 at 13:40 • point

Thank you for liking and following my Sol-20 Reproduction project.

  Are you sure? yes | no

Ken Yap wrote 01/21/2021 at 15:55 • point

Thanks for following #8085 Minimax 
But please note that this project is shelved, and anyway the design is not mine. The circuit has been verified as viable by other people. So nothing to see here.

  Are you sure? yes | no

roelh wrote 06/18/2020 at 13:00 • point

Hi, thanks for liking #VGA generation card !

  Are you sure? yes | no

Thomas wrote 01/01/2020 at 08:31 • point

Hi - thanks for liking my little lazy MODBUS with Forth project!
By the way: Happy New Year :-)

  Are you sure? yes | no

Laser Developer wrote 02/08/2019 at 05:15 • point

Thank you for liking and following Open Source LiDAR - Unruly! Comments and suggestions are most welcome :). LD.

  Are you sure? yes | no

Ed S wrote 10/28/2017 at 11:16 • point

Thanks for liking our #OPC-5 - a CPU for FPGA, in one page project!

  Are you sure? yes | no

prof_braino wrote 12/30/2014 at 20:52 • point

Thanks! We are preparing to release PropForth 6 shortly. PF6 will support using the prop cogs as a "multitasking pool" for more than 8 tasks (up to memory limit) with a small overhead cost. Also, PF6 will begin FPGA support. We can now tweak the propeller cpu itself, removing unused resorces, optimizing for FORTH execution, and adding "hardware" (ADC/DAC, etc) in FPGA. May be interesting and possibly useful.

  Are you sure? yes | no

Send a private message to forthnutter

Become cool instantly

Create your Hackaday.io profile like forthnutter and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2025 Hackaday

Report user as inappropriate

You are about to report the user "forthnutter", please tell us the reason.